DPA Microphones 4066 CORE Omnidirectional Headset Microphone with Mini-Jack Connector for Sennheiser Wireless (Small) Brown

Description

The DPA 4066 headset microphone offers clean and transparent sound quality with lots of headroom. For years, this has been the chosen headset mic for broadcasters as well as theaters on Broadway, as well as in many auditorium and lecture halls due to its pristine sound and durability. The headset construction is unique, with a detachable mic boom that can be switched from the left or right side of the headset and then reattached. Humidity, often an issue in theatrical applications, is not a problem. This microphone is constructed with a double-vent protection system and a drop stopper on the microphone boom. Also, the materials inside the mic are water resistant, making it very difficult for the microphone to fail due to humidity. The microphone’s sensitivity is 6 mV/Pa. This matches the level of the human voice to the general input sensitivity of most wireless transmitters. If powered correctly, the microphone will be able to handle very high sound pressure levels up to 144 dB SPL before clipping occurs.

Features

Water-repellant nano-coating of the cover and housing
Hermetic sealing of the sensitive amplifier at the core of the mic
Dual gold-plating of the diaphragm

Specs

Directional pattern: Omnidirectional

Principle of operation: Pressure

Cartridge type: Pre-polarized condenser

Frequency response: 20 Hz - 20 kHz

Effective frequency range: ±2 dB

Distortion, THD < 1% - Legacy: 120 dB SPL RMS, 123 dB SPL peak

Distortion, THD < 1% - CORE: 134 dB SPL RMS, 137 dB SPL peak

Dynamic range - Legacy: Typ. 97 dB

Dynamic range - CORE: Typ. 111 dB

Max. SPL, THD 10%: 144 dB SPL peak

Rated output impedance: 30 - 40 Ω

Power supply (for full performance)

For wireless systems: Min. 5 V - max. 10 V through DPA adapter
With DAD6001-BC: P48 (Phantom Power). Will work from 12 V
Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
Connector: MicroDot, TA4F Mini-XLR, 3-pin LEMO, Mini-Jack

Polarity

Positively increasing sound pressure produces positive going voltage on MicroDot pin
Temperature range: -40°C to 45°C (-40°F to 113°F)
Relative humidity (RH): Up to 90%

1. Your order is usually shipped out within 24-48 hours after your payment is received.
2. The tracking number of your parcel will be sent to you after your order is despatched. You may use the tracking number to check the status of your order online.
3. The shipping fee will be auto-added in the grand total when you send payment.

4.8