DYNACORD L2800FD DSP Power Amplifier

Description

With 2 channels of 1,400W peak power on tap and onboard DSP, the Dynacord L2800D offers plenty of juice to power your passive PA system with authority. Built-in FIR Drive technology and true 2 ohm stability mean your system will sound its best, every time. Thanks to this power amplifier´s rock-solid reliability, you will perform with peace of mind at every gig. The L2800FD´s intuitive system control software makes setup and control easy, so you spend more time focusing on the performance and less time worrying about your gear.

Features

• Maximum output, dual channel: 2,200W @2 ohms; 1,300W @4 ohms; 650W @8 ohms
• Maximum output, bridged: 4,400W @4 ohms; 2,600W @8 ohms
• Frequency response: 10Hz–21kHz
• True 2 ohm stability
• FIR Drive technology

Specs

• Maximum RMS Voltage Swing THD = 1%, 1 kHz: 78.8 V
• Voltage Gain Ref.1 kHz: 32.0 dB
• THD at 900 W/4 Ω MBW = 80 kHz, 1kHz: < 0.05%
• IMD-SMPTE, 60 Hz, 7 kHz: < 0.1%
• DIM30, 3.15 kHz, 15 kHz: < 0.05%
• Maximum Input Level: +21 dBu
• Crosstalk ref. 1 kHz, at 100W/4 Ω: < -80 dB
• Frequency Response, ref. 1 kHz: 10 Hz to 21 kHz (±1 dB)
• Input Impedance, Active Balanced 20 k Ω
• Signal to Noise Ratio Amplifier, A-weighted, ref to Max. Output Power@ 8 Ω: >107 dB
• Output Noise, A-weighted: < -68 dBu
• Output Stage Topology: Class H
• Power Requirements: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz(factory configured)
• Power Consumption 1/8 Maximum Output Power @ 4 Ω: 700 W
• Mains Fuse: 240 V/230 V: T15AH; 120 V/100 V: T25AH
• Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay
• Cooling: Front-to-rear, 3-stage-fans
• Ambient Temperature Limits: +5°C to +40°C (40°F to +105°F)